For DVR / NVR Troubleshooting click here
Before you start you will need:
 |
 |
 |
| BEFORE installing, test each camera locally to confirm they function properly. |
|
Connect the ends of the cable attached to the camera to the ends of a video /power cable labeled TO CAMERA ONLY.
|
Connect the BNC connector of the video/power cable labeled TO DVR ONLY to an open video input on the DVR.
|
Power requirements:
| Device | Output Power Voltage | Output Power Current |
|---|---|---|
| DVR | 12 V | 2000 mA |
| Camera | 12 V | 2000 mA |