Articles in this section

See more

H2THD80 Series Quick Setup Guide

Follow

 

 

C-H441P8-W2I2M_1.png

*Images may vary

 

Download Links

WG4 Series Manual

Click to Download English Quick Setup Guide

>What’s in the Box

Product Overview

Connecting Your System

Connecting Your Wired Cameras

Connecting Your Wireless Indoor IP Cameras

Booting Up for the First Time

Password Reset Instructions

Night Owl X & Night Owl X HD Mobile Apps

Using Night Owl X & Night Owl X HD

Night Owl X CMS Software

W² Fusion Hybrid™ Technology

Frequently Asked Questions (FAQ)

Footnotes

blobid4.jpg

What’s in the Box

DISCLAIMER: The exact components of your system, images, and quantities may vary depending on your model number. While these may vary, this QSG will address the setup and initial configuration of your DVR and cameras.
 
Hybrid-DVR.png Hybrid-Outdoor_Camera.png Hybrid-Indoor_Camera.png Hybrid-Mounting_Template.png
Hybrid-Video_Power_Cable.png Hybrid-Power_Splitter.png Hybrid-HDMI.png Hybrid-Ethernet.png
Hybrid-Power_Supply_.png Hybrid-IP_Camera_Cable.png Hybrid-DVR_PA.png Hybrid-Camera_PA.png
Hybrid-Safety_Sticker.png Hybrid-USB_Mouse.png Hybrid-Mounting_Hardware.png Hybrid-Metal_Base.png
 
Hybrid-Items_Not_Included.png
 
IMPORTANT: For best results, use all the included Night Owl accessories. Third party accessories may not work properly.
 
blobid4.jpg

Product Overview

DVR Rear View

Hybrid-DVR_Rear_View.png

Images used are for reference only. Your product may vary slightly. An 4 channel model is displayed above.
  1. Sync – Press and release to sync the DVR with the wireless cameras.
  2. Video Inputs – Allows for the connection of BNC cameras.
  3. USB Ports – Allows for the connections of a USB mouse and/or a USB flash drive. You will connect the included USB mouse to assist you in navigating the DVRs menu interface. You will connect a USB flash drive to download video files from the DVR and save them to your USB flash drive.
  4. HDMI Output – Allows for the video connection. If the TV/Monitor has an HDMI input, connect the HDMI cable from the HDMI output port on the DVR to the HDMI input port on your TV/Monitor. NOTE: Preferred method.
  5. VGA Output – Allows for the video connection. If the TV/Monitor has a VGA input, connect the VGA cable from the VGA output port on the DVR to the VGA input port on your TV/Monitor. (VGA Cable not included)
  6. Audio Inputs & Outputs – Allows for the connection of an audio-enabled camera or self-powered microphone and an external speaker to the DVR. (Audio enabled camera, microphone and speaker not included)
  7. RJ-45 (Ethernet) Port – Used to connect the DVR to your router/modem via the included Ethernet cable.
  8. Power Input – Used to connect the included 12V DC power supply.
  9. Power Switch – Use this switch to power ON/OFF the DVR. Make sure the power switch is in the ON position before attempting to use the DVR.
  10. Antennas – Connection for the included antennas.
 
 
blobid4.jpg

Connecting Your System

Hybrid-HDMI_to_DVR_port.png

1. Plug included HDMI cable into the HDMI port on the back of the DVR.

Hybrid-HDMI_to_TV_2.png

2. Plug the other end of the HDMI cable into the back of the TV or monitor.

Hybrid-USB_Mouse_to_DVR.png

3. Plug the USB mouse into the USB port on the back of the DVR.

Hybrid-Ethernet_to_DVR.png

4. Plug the included Ethernet cable into the LAN port on the back of the DVR.

Hybrid-Ethernet_to_Router.png

5. Plug the other end of the Ethernet cable into a numbered port on the back of the router.

Hybrid-Test_Cameras.png

STOP: BEFORE installing, test each camera locally to confirm they function properly.
 
blobid4.jpg

Connecting Your Wired Cameras

Hybrid-Camera_BNC.png

1. Connect the ends of the cable attached to the camera to the ends of a video /power cable labeled TO CAMERA ONLY.

Hybrid-BNC_to_DVR.png

2. Connect the BNC connector of the video/power cable labeled TO DVR ONLY to an open video input on the DVR.

Hybrid-Video_Power_connectors.png

3. Connect the red female power leads of the video/power cables to the male power splitter ends.

Hybrid-Splitter_to_Camera_PA.png

4. Connect the power splitter to the camera power adapter and plug the adapter into a surge protector or Uninterruptible Power Supply (UPS).

Hybrid-Connect_DVR_PA.png

5. Connect the DVR power adapter to the Power Input on the rear of the DVR.

Hybrid-DVR_PA_to_PS.png

6. Plug the DVR power adapter into a surge protector or Uninterruptible Power Supply (UPS).
 
 
 
blobid4.jpg

Connecting Your Wireless Indoor IP Cameras

Hybrid-Wireless_IP_Cam.png

  1. Insert the small end of the micro USB cable into the camera and the other end into the USB power supply.

Hybrid-Wireless_IP_Cam_Connect.png

2. Plug the power supply into a socket or a UPS (Uninterruptible Power Supply).

Hybrid-Wireless_IP_Cam_to_PS.png

3. Be patient as the camera(s) power up. It may take a couple of minutes.

 

4. Once the camera(s) are powered up, video will be transmitted to the DVR.

 

Hybrid-Wireless_IP_Trasmit_to_DVR.png

 
NOTE: If you see the camera(s) live view, you can move the camera(s) to the mounting location(s). If you no longer see the live view after moving the camera(s) to their mounting location, the camera may be too far from the DVR. 
 
 
Hybrid-Magnetic_Base_location.png
 
 
 
 
 
 
blobid4.jpg

Booting Up for the First Time

Setup wizard 

When you power on the DVR
you will be prompted with the
following screen. Please follow
the instructions to complete the
Startup Wizard.
 night-owl-setup-wizard.jpg
 
Important Please Read
On the Password Creation screen, please note the following:
night-owl-login-icon.png
Admin Account Creation
 
By default, the username will be admin. It must remain admin upon your initial account configuration. However, you may add additional users at a later time.
 
NOTE: Password can be any alphanumeric combination between 6 and 20 characters.
night-owl-email-icon.png
Recovery Email Address
 
Please ensure you provide a valid email address in case you ever forget your account information.
 
Note: You MUST enter a VALID email address. If you don't, you will have to call Tech Support to reset your password, and that just seems like a waste of time. 
night-owl-notes-icon.png Remember Your Password
 
Night Owl strongly recommends writing down your password within the Quick Setup Guide. You will need it every time you log into your DVR and to remotely view on a Smart Device.
 
 
 
3. When you reach the Camera/Channel Settings screen, you will want to have installed the cameras in their final position. Please make sure you have mounted cameras at least 7ft. above the ground and angled them slightly down.
 
night-owl-infared-camera.png
 
At this stage of the Startup Wizard, you will be instructed on adjusting the camera sensitivity and setting the Motion Detection Area. Having your cameras in their final position will be key.
 
To detect motion for the front door to your home, place the camera to the side of the entrance.
 
This is the last screen you will
see when you have successfully
completed the Startup Wizard.
 night-owl-setup-complete.jpg
NOTE: For additional configuration of your DVR, please refer to the owner’s manual located on our support page at www.NightOwlSP.com.
 
blobid4.jpg

Password Reset InstructionsHybrid-Forget_Password.png

 
Hybrid-Password_Reset_2.png
 

Hybrid-Forgot_Password_3.png

 
blobid4.jpg

Night Owl X & Night Owl X HD Mobile Apps

Night Owl fits right in with your mobile lifestyle by allowing you to remotely monitor your home or business. Our free and exclusive Night Owl X app for iOS® and Android™ phones and Night Owl X HD for iOS® and Android™ tablets are available in the App Store and Google Play Store.

Apple_Store_Icon.jpg
Google_Play_Icon.jpg

NOTE: To ensure the best customer experience make sure you download the correct app for your device.

 

Phone_NOX_SignIn.jpg NOX_HD_CreateAcct_Tablet.jpg

Night-Owl-X-App-Icon-2017.jpg

Night Owl X

Smartphones

For remote viewing on an
iOS® or Android™ phone,
make sure you download
Night Owl X
 

Night-Owl-X-HD---App-Icon-2017_1.jpg

Night Owl X HD

Tablets

For remote viewing on an
iOS® or Android™ tablet,
make sure you download
Night Owl X HD
 
 
 
 

Download and Install Application

1Download the appropriate App from the App Store or Google Play Store and install the application on your device.

Apple_Store_Icon.jpgGoogle_Play_Icon.jpg

NOTE: Use correct app for compatibility.

Night-Owl-X-App-Icon-2017.jpg

Smartphone:
Night Owl X

Night-Owl-X-HD---App-Icon-2017_1.jpg

Tablet:
Night Owl X HD
NOX_CreateAppScreen_Hand.jpg
create_account.jpg

2 Create an account using an email address for the username and a password between 6–20 characters. This account allows the user to login to multiple Night Owl devices. Please note, this is NOT the login info created for the DVR, this login is unique to the Night Owl X and Night Owl X HD apps. The DVR login should be stored on page 5, step #2 of the Quick Setup Guide included in your DVR kit.NOTE: Setup is the same for phone and tablet.

3 To confirm your email address, click the link in the confirmation email from “Night Owl (no_reply@NightOwlsp.com)”.

 

NOTE: You MUST complete Step 3 before continuing! Go to your email, open the confirmation email from Night Owl, and click the “Confirm Email” link. You MUST confirm your email to use the app!

 
 

Connecting and Adding your Device

NOTE: When adding a new device, it may take 5–10 minutes before you begin receiving notifications.

A device can be added to the Night Owl X app by using the application’s Smart Auto Detection or through a QR Code Setup. With Smart Auto Detection, your DVR will automatically be detected by the Night Owl X software, making connecting easy! To use this preferred method, ensure your Smart Device and DVR are both on the same network.

THD301_Router.jpg

 

 

 

4. Adding a Device

To begin adding a new device, first select the yellow plus sign within the Device menu.

 THD301_Device_Name.jpg

4A. Smart Auto Detection

If your Smart Device and DVR are on the same network, the Smart Auto Detection will auto find your DVR. If this method is not available, please use the QR Code Setup from step 4B below.

 THD301_Device_Name2.jpg

4B. QR Code Setup

To use the QR Code Setup, select Setup device by QR Code and hover your Smart Device camera lens over the QR Code located on the top right corner of your DVR.

 THD301_Device_Name3.jpg

  

 

blobid4.jpg

Using Night Owl X & Night Owl X HD

Login to your App

5. On the Device Login screen, enter the login information for the DVR (Remember, the DVR login and Night Owl X app login are different). The DVR username is admin by default. If you are not the admin, login with your username credentials. If you do not have a username and password, please contact the admin and have them create one for you using the instructions on page 7 of your QSG.

device_hand3.jpg

 

12

App Overview

app-overview.jpg

 
 
blobid4.jpg

Night Owl X CMS Software

Access your DVR from any computer, anywhere!

night-owl-computer-screen.png

night-owl-live-view-icon.png
Live View
Viewing live video, controlling
PTZ functionality and setting
image parameters.
night-owl-playback-icon.png
Playback
View system recordings
and images and save them
directly to your PC or Mac ®.
night-owl-device-manager-icon.png
Device Manager
Add and configure
available DVRs and
cameras on your network.
 
 

Night Owl X CMS Software

The Night Owl X Control Management Software (CMS) allows you to view your
Night Owl Security system remotely from a PC or Mac®. Additionally, you can
playback recorded video, save video and images directly to your PC or Mac®,
configure numerous settings such as channel names and set record preferences.
 
To download the CMS Software:
  1. Go to www.NightOwlSP.com.
  2. Click on the Support tab.
  3. In the search bar, type “X CMS”.
  4. Download the Night Owl X CMS software.
  5. Once downloaded, select PC or Mac®.

 

 

blobid4.jpg

W² Fusion Hybrid™ Technology

Hybrid-W2-1.png
Hybrid-W2-2.png
 
 
 
blobid4.jpg

Footnotes

1. Internet and Smart Device access requires a router and High-Speed Internet connection with a minimum 2Mbps upload speed. If your DVR is not connected to the Internet, you will not be able to remotely view your system on your Smart Device or PC/Mac®. May require a free firmware update.
 
2. The DVR is currently accessible on iPhone®, iPad®, and Android™ running on 3G/4G Smart Devices. Push alerts currently available on Android™ and iOS®.
 
3. Wireless 1080p cameras are intended for Indoor use ONLY and have an operating temperature range of 14°F to 104°F. Wired 4K cameras are intended for Indoor/Outdoor use and have an operating temperature range -40°F to 140°F. Wired 4K cameras are weather-resistant, not waterproof. Not for use in direct exposure to water.
 
4. Night Owl® does not charge any monthly fees to view or control your product over the Internet and/or Smart Device. Carrier fees and charges may apply.
 
5. Night Owl® apps are free downloads compatible with Apple® and Android™ devices only. Compatibility at the time of manufacturing. Future Android™ and iOS® updates could affect the app experience.
 
6. Night Vision range up to 33 ft. for Wireless 1080p cameras and up to 100 ft. for Wired 4K cameras (under ideal conditions). Objects at or beyond this range may be partially or completely obscured, depending on the camera position.
 
7. Recording capacity may vary. The size of your pre-installed hard drive will affect recording capabilities. Optimal recording based on using the lowest recording quality settings with one camera.
 
8. Wireless 1080p cameras have a 180 ft. wireless range within direct line of sight of the DVR.
 
9. Wireless 1080p cameras include 2-way audio. Wired 4K cameras are not audio enabled.
 
10. Wireless 1080p cameras do not work independently and must be connected to this Night Owl® Hybrid DVR. These cameras are ONLY compatible with an HTHD Series DVR. These are NOT stand-alone cameras.
 
 
blobid4.jpg

Frequently Asked Questions (FAQ)

 
 
1. Does my DVR have to be connected to the Internet?
Your DVR does not require an Internet connection for basic operation, but
you will need to connect the DVR to your router in order to remotely view
your system on a PC/Mac® or Smart Device.
 
2. Does my DVR have to be connected to a TV or monitor?
For initial setup, you will need to connect your DVR to a TV or monitor. After
completing the initial setup, your DVR does not need to be connected to a TV or
monitor to view or capture recordings. You can view your system using the Night
Owl X CMS Software on a PC/Mac® or by downloading the Night Owl X or Night
Owl X HD apps on your Smart Device.
 
3. Are my cameras weatherproof?
Yes and no. the 4K wired cameras are weatherproof and will endure minimal moisture and dirt/debris. However, Night Owl strongly recommends placing all outdoor cameras under an eave or awning to help shield them from overexposure to the elements, which could reduce your camera's lifespan. NO, the Wireless INDOOR IP Cameras are NOT weatherproof and should NOT be used outdoors.
 
4. Why does my camera stop working at night?
It is possible that your camera is not receiving enough power for the LEDs
needed for Night Vision. Try plugging that camera directly into the camera power
adapter (bypassing the splitter) to see if the LEDs turn on. If they do, you may
need to purchase an additional camera power adapter for that camera.
 
5. Why is the Night Owl X or Night Owl X HD app not accepting my password?
The Night Owl apps will require two passwords to configure: one password will be
used to login to the app itself and the second will be the admin password of your
DVR. In order to add a device to the app, you will need to enter the DVR’s admin
password. Please refer to pages 5 and 7 of this QSG. Remember, when setting up
your Night Owl X or Night Owl X HD app, you must confirm your email by clicking
the “Confirm Email” link sent by Night Owl upon initial application configuration.
 
6. Why can’t I connect using the Night Owl X app, Night Owl X HD app or
 Night Owl X CMS Software?
If you are having trouble connecting using our mobile app or client software,
A) your Night Owl system may not be connected to a router, B) the latest
firmware or client software may not be installed on your computer or mobile
device or, C) the password may have been entered incorrectly or, D) You may
need to restart your DVR and try again.
 
blobid4.jpg
 
Hybrid-Contact_Us_2.png
 
 

Related articles

Comments

0 comments

Article is closed for comments.