*Images may vary


What’s in the Box
DISCLAIMER: The exact components of your system, images and quantities may vary depending on your model number. While these may vary, this QSG will address the setup and initial configuration of your NVR and cameras.
NVR (x1) |
Camera (s) |
9ft. Wi-Fi Extender Antenna and Mounting Hardware (1 for every 4 Cameras) |
NVR Antenna (x2) |
Camera Antenna (1 per camera) |
NVR Power Adapter (x1) |
9 ft. Camera Power Adapter (1 per camera) |
6 ft. HDMI |
6 ft. RJ-45 Cable (Ethernet) (x1) |
Safety Stickers (x3) |
Mounting Hardware (3 Per Camera) |
USB Mouse (x1) |
Your system may include an audio enabled camera. Each audio enabled camera comes equipped with an audio enabled BNC Video/Power cable. Simply connect the white audio end of the BNC cable to an open audio input port on the rear of the NVR and ensure the audio input port number and channel port number match. For instance, if you have an audio enabled cable plugged into video input port 1, it will also need to be connected to audio input port 1. After making the audio input connection, be sure to enable the audio function in the NVR’s menu.
|
Power
Splitter(s)
|
![]() |
NOTE: For best results, use the included Night Owl accessories. Third party accessories may not work properly.


Product Overview
NVR Rear View
1. Audio Output – Allows for the connection of an amplified speaker using a TRS 3.5mm / 1/8 inch commonly known as a phone/headphone jack.
2. VGA Output – VGA output allows for a video connection. If the TV/Monitor does not have an HDMI input but does have a VGA input, connect the VGA cable from the VGA output port on the NVR to the VGA input port on your TV/Monitor. (VGA cable not included)
3. HDMI Output –HDMI output allows for the video connection. If the TV/Monitor has anHDMI input, connect the HDMI cable from the HDMI output port on the NVR to theHDMI input port on your TV/Monitor.
4. RJ-45 (Ethernet) Port – The RJ-45 port will be used to connect the Wireless NVR to your modem/router for remote viewing. Please note that your Wireless NVR comes with built-in Wi-Fi for the cameras to transmit to the NVR. However, you will need to manually connect the NVR to your modem/router to remotely view on a smart device or PC/Mac®.
5. USB Ports –Allow for the connection of a USB mouse and/or a USB flash drive. Connect the included USB mouse to assist in navigating the NVR’s menu interface. Connect a USB flash drive to download video files from the NVR for long term storage or sharing.
6. Power Input – Power input to connect the included 12V DC power supply.
7. NVR Antenna Mount – For installation of two included NVR antennas.
Positioning Your Wireless NVR and Cameras



HOW OBSTACLES AFFECT YOUR SIGNAL STRENGTH

Powering the NVR and Wireless Cameras
Your Wireless NVR must be powered on using the NVR power adapter. Similarly, each wireless camera must be powered with a camera power adapter. Though these cameras wirelessly transmit video to the NVR, they are not battery powered,
and must therefore be powered via the included adapters. Each camera within your system will come equipped with its own camera power adapter.
|
![]() |

Connecting Your System
1. Connect the two included antennas to your wireless NVR. This will ensure you achieve the maximum wireless range for transmission from your wireless cameras. |
2. Plug one end of the included HDMI cable into the HDMI port on the back of the Wireless NVR. |
3. Plug the other end of the HDMI cable into the back of your TV or monitor.
NOTE: To view cameras, TV/Monitor must be tuned to the same Input the HDMI is plugged into.
|
4. Plug one end of the included Ethernet cable into the LAN port on the back of the Wireless NVR. |
5. Plug the other end of the Ethernet cable into a port on the back of your router.
|
6. Plug the USB mouse into the USB port on the back of the NVR.
|

NOTE: Power adapters will be labeled as either NVR or Camera.
|
8. Plug the Wireless NVR power adapter into a surge protector or Uninterruptible Power Supply (UPS).(surge protector and UPS not included)
|
9. Connect the included camera antenna to the antenna mount on the camera.
|
10. To ensure all cameras are working properly, please test them locally before installing them.
|
![]() |
11. Each camera comes equipped with its own camera power adapter. Connect the female power cable coming from the camera to the male power end of the camera power adapter. Next, plug the camera power adapter into a wall outlet.
|
![]() |
Admin Account Creation
By default, the username will be admin. It must remain admin upon your initial account configuration.
However, you may add additional users at a later time.
NOTE: Password can be any alphanumeric combination between 6 and 20 characters.
|
![]() |
Recovery Email Address
Please ensure you provide a valid email address in case your ever forget your account information.
|
![]() |
Remember Your Password
Night Owl strongly recommends writing down your password within the Quick Setup Guide. You will need it every time you log into your DVR and to remotely view on a Smart Device.
|

4. This is the last screen you will
see when you have successfully
completed the Startup Wizard.
|
![]() |


Night Owl X & Night Owl X HD Mobile Apps
Night Owl fits right in with your mobile lifestyle by allowing you to remotely monitor your home or business. Our free and exclusive Night Owl X app for iOS® and Android™ phones and Night Owl X HD for iOS® and Android™ tablets are available in the App Store and Google Play Store.
![]() |
![]() |
NOTE: To ensure the best customer experience make sure you download the correct app for your device.
![]() |
![]() |
Night Owl X Smartphones For remote viewing on an
iOS® or Android™ phone,
make sure you download
Night Owl X
|
Night Owl X HD Tablets For remote viewing on an
iOS® or Android™ tablet,
make sure you download
Night Owl X HD
|
Download and Install Application 1Download the appropriate App from the App Store or Google Play Store and install the application on your device. NOTE: Use correct app for compatibility.
|
![]() |
||
![]() |
2 Create an account using an email address for the username and a password between 6–20 characters. This account allows the user to login to multiple Night Owl devices. Please note, this is NOT the login info created for the DVR, this login is unique to the Night Owl X and Night Owl X HD apps. The DVR login should be stored on page 5, step #2 of the Quick Setup Guide included in your DVR kit.NOTE: Setup is the same for phone and tablet. 3 To confirm your email address, click the link in the confirmation email from “Night Owl (no_reply@NightOwlsp.com)”. |
NOTE: You MUST complete Step 3 before continuing! Go to your email, open the confirmation email from Night Owl, and click the “Confirm Email” link. You MUST confirm your email to use the app!
Connecting and Adding your Device
NOTE: When adding a new device, it may take 5–10 minutes before you begin receiving notifications.
A device can be added to the Night Owl X app by using the application’s Smart Auto Detection or through a QR Code Setup. With Smart Auto Detection, your DVR will automatically be detected by the Night Owl X software, making connecting easy! To use this preferred method, ensure your Smart Device and DVR are both on the same network.
4. Adding a Device To begin adding a new device, first select the yellow plus sign within the Device menu. |
![]() |
4A. Smart Auto Detection If your Smart Device and DVR are on the same network, the Smart Auto Detection will auto find your DVR. If this method is not available, please use the QR Code Setup from step 4B below. |
![]() |
4B. QR Code Setup To use the QR Code Setup, select Setup device by QR Code and hover your Smart Device camera lens over the QR Code located on the top right corner of your DVR. |
![]() |


Using Night Owl X
Login to your App
5. On the Device Login screen, enter the login information for the DVR (Remember, the DVR login and Night Owl X app login are different). The DVR username is admin by default. If you are not the admin, login with your username credentials. If you do not have a username and password, please contact the admin and have them create one for you using the instructions on page 7 of your QSG.

App Overview


Night Owl X CMS Software
Access your DVR from any computer, anywhere!
![]() Live View
Viewing live video, controlling
PTZ functionality and setting
image parameters.
|
![]() Playback
View system recordings
and images and save them
directly to your PC or Mac ®.
|
![]() Device Manager
Add and configure
available DVRs and
cameras on your network.
|
Night Owl X CMS Software
- Go to www.NightOwlSP.com.
- Click on the Support tab.
- In the search bar, type “X CMS”.
- Download the Night Owl X CMS software.
- Once downloaded, select PC or Mac®.

Pairing a Replacement Wireless Camera
To pair a replacement camera to your NVR, please use the below steps:
1. Power on the replacement camera
using the camera power adapter.
NOTE: This should be done locally at the
NVR to avoid interference.
|
![]() |
2. With the NVR connected to a TV/monitor, right click on your mouse and navigate to the Main Menu using the options bar.
|
![]() |
3.
a) Go to the Camera Menu and Select the Add Camera tab on the left side of the menu.
b) The top portion of the screen will list cameras that have been found but not yet paired.
c) The bottom portion of the screen will show all cameras that are currently paired to the NVR.
|
![]() |
4. Next, you will need to reset the replacement camera. To do so, press and hold the reset button until you hear a beep, indicating the camera has begun the reset process.
NOTE: The reset process may take up to 3 minutes.
|
![]() |
5.
a) After 3 minutes have passed or after hearing the camera beep, click on
Wireless Add located on the Add Camera screen. Your NVR will now search for new cameras.
b) NOTE: The replacement camera will not appear in the bottom screen with all other paired cameras until the NVR finishes the process of finding and pairing the new camera.
|
![]() |
6. Within the Wireless Add screen, the “Number of Cameras Connected” signifies those cameras that are already paired to the Wireless NVR and will not immediately reflect this new camera.
NOTE: You cannot exceed the number of Wireless NVR channels you have. If you have a 4 channel system, the maximum number of cameras you can have paired is 4.
|
![]() |
7. If you have not exceeded the channel limitation, the new camera will appear in a vacant video field once paired.
![]() |
8. WooHoo! Your replacement camera has now been paired to the Wireless NVR using the Wireless NVR’s built-in Wi-Fi.
![]() |


Comments
0 comments
Article is closed for comments.