Congratulations on successfully adding your Night Owl HUB to the Night Owl Protect Application! Now, let's move on to pairing additional wireless cameras with the HUB.
Just follow these simple steps:
1. Power on your cameras: If you have plug-in wireless cameras, please plug each camera into a nearby outlet for initial pairing. If you have battery-powered cameras, insert the batteries into the cameras and place them near the hub. Distance between the HUB and the cameras should not exceed 10 ft in line of sight to ensure proper initial camera pairing. Once done, tap "Continue."
2. Open the Night Owl Protect App and select the HUB product from the “Devices List”, on the next screen, scroll down to the cameras list and tap on the blue plus (+) Sign.
Search for cameras: The app will now begin searching for your cameras.
3. Verify your cameras: Make sure you can see your cameras and then tap "Continue."
Important: If you don't see one of your cameras appear, press the reset button on the camera in question for 3 seconds. The camera will audibly inform you when it returns to pairing mode. Please be patient as this may take a couple of minutes.
4. Configure your cameras:
At this point, tapping on one of the cameras will allow you to configure the rest of the camera’s attributes: Channel Name: You can select from a range of predetermined names for that camera or title it yourself. Recording settings, Notifications, Spotlight, and Activity Zone can also be configured in this section.